Overview
The Mechanical Briquetting Press BriqTech model: BT-070-800Max-Duo is designed for the production of biomass pellets, offering efficiency and reliability in operation.
The mechanical briquetting press operates on the principle of accumulating and releasing kinetic energy through a flywheel. This mechanism allows compression of the material in a special chamber, transforming it into dense and uniform briquettes. Due to the high force generated in a short period, this type of press is ideal for large production volumes and ensures efficient energy consumption.
The mechanical briquetting press produces briquettes from rapeseed straw or wood shavings Series "BriqTech" model: BT-070-800Max-Duo. The principle of the piston-driven mechanical press - the raw material is pressed without adhesives or binders, forming briquettes (solid fuel) with a density of up to 1450 kg/m3. Briquettes are used in thermal power plants, boilers, stoves, wood-burning ovens, and provide higher efficiency and calorific power than firewood and are 100% ecological!
Technical Specifications of the briquetting press:
Productivity up to: 1200 – 1800 kg/hour depending on the raw material
Briquette diameter: 70-75 mm for vegetable waste, wood shavings (80-85 mm for straw)
Briquette length: 100-300 mm
Main motor of the briquette press - 45 kW
Feeding motor - 3 kW
Dosing motor – 3 kW
Dosing motor – 3 kW
Total installed power - 2 X 60 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5%, frequency 50 Hz
Length: 3300 mm Width: 1550 mm Height: 3200 mm
Briquetting machine weight: 2 X 4200 kg
Raw material moisture content: 12-14-16%
Raw material size: 3 - 8 mm
Briquette density at the exit from the mechanical briquetting press up to 1100 - 1450 kg/m3
Type of raw material: wood waste: wood shavings, sawdust, chips, MDF and particleboard dust, wood shavings; Vegetable waste: cereal straw, alfalfa, rapeseed, soy, sunflower hulls, corn stalks, walnut shell shavings, and other biomass waste containing lignin; Other wastes: peat, RDF
Technology used since 2025
The briquette press consists of:
Mechanical briquetting press for straw or wood shavings BT-070-800Max-Duo
Oil cooling system through radiator and fan and oil heating
Cooling system for the briquette forming head that maintains a constant temperature
Preheating system for the conical bushing and heating of the conical bushing during operation
Automated hydraulic compaction at the briquette forming head
Briquette cooling line 10 meters
Hopper for homogenizing dry raw material of 3 cubic meters
Auger for transporting raw material from the hopper to the mechanical briquetting press
Electric control panel and command, inverter, with 10 meters three-phase cable
Optional accessories for briquetting press briqtech - briquetting machine:
Automation: Heating -> Automatic start mode -> Automatic operating mode
Dust extractor (raw material), under the briquette forming head
Consumables set (bushing, piston, conical bushing) model 2025 - special steel, each raw material has a different set
Additional set for briquetting briquettes from 80 mm straw
Overload sensor for the homogenization hopper
Hopper for homogenizing raw material of 5 cubic meters
Automated briquette cutter by length, Briquette cutter - pellets
Semi-automated briquette wrapping in shrink film through a tunnel
Power factor compensation panel with capacitor banks in 6 steps, high energy efficiency, cos φ 0.99
Conclusion
The Mechanical Briquetting Press BriqTech model: BT-070-800Max-Duo represents a practical solution for exploiting biomass into eco-friendly fuel, with optimized yield and costs.
