Overview
The Mechanical Briquette Press BriqTech model: BT-070-800Max is designed for the production of biomass pellets, offering efficiency and reliability in operation.
The mechanical briquetting press operates by accumulating and releasing kinetic energy through a flywheel. This mechanism allows the compression of material in a special chamber, transforming it into dense and uniform briquettes. Due to the high force generated in a short time, this type of press is ideal for large production volumes and ensures efficient energy consumption.
The mechanical briquette press produces briquettes from rapeseed-straw or sawdust Series "BriqTech" model: BT-070-800Max. The principle of the press with a piston-driven mechanical system - raw material is pressed without adhesives or binders, forming briquettes (solid fuel) with a density of up to 1450 kg/m3. The briquettes are used in thermal power plants, furnaces, wood stoves, and fireplaces, with a yield and calorific value higher than that of firewood and 100% ecological!
Technical features of the briquetting press:
Productivity up to: 600 – 900 kg/hour depending on the raw material
Briquette diameter: 70-75 mm for plant residues, sawdust (80-85 mm for straw)
Briquette length: 100-300 mm
Main briquette press motor - 45 kW
Feeding motor - 3 kW
Dosage motor – 3 kW
Total installed power - 60 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5%, frequency 50 Hz
Length: 3300 mm Width: 1550 mm Height: 3200 mm
Weight of the briquetting machine: 4200 kg
Moisture content of the raw material: 12-14-16%
Raw material size: 3 - 8 mm
Briquette density at the exit from the mechanical briquetting press up to 1100 - 1450 kg/m3
Type of raw material: wood waste: sawdust, shavings, chips, MDF and OSB dust, wood sawdust; Plant residue waste: cereal straw, alfalfa, rapeseed, soy, sunflower husks, corn stalks, walnut shell sawdust, and other biomass residues containing lignin; Other waste from: peat, RDF
Technology used since 2025
The briquette press consists of:
Mechanical briquette press for straw or sawdust BT-070-800Max
Oil cooling system through radiator and fan and oil heating
Cooling system for the briquette forming head that maintains a constant temperature
Preheating system for the conical bushing and heating of the conical bushing during operation
Automated hydraulic compression at the briquette forming head
Cooling line for briquettes 10 meters
Bunker for homogenization of dry raw material of 3 cubic meters
Screw conveyor for transporting raw material from the bunker to the mechanical briquetting press
Electric control panel and command, inverter, with a three-phase cable of 10 meters
Optional accessories for BriqTech briquetting press - briquette machine:
Automation: Heating -> Automatic start mode -> Automatic operation mode
Dust extractor (raw material), under the briquette forming head
Consumables set (bushing, piston, conical bushing) model 2025 - special steel, each raw material has a different set
Additional set for briquetting 80 mm straw briquettes
Overload sensor for bunker homogenization level
Bunker for homogenization of raw material of 5 cubic meters
Automated briquette cutter by length, briquette cutter - pellets
Semi-automated briquette wrapping in shrink film through a tunnel
Reactive energy compensation panel with capacitor banks in 6 steps, high energy efficiency, cos φ 0.99
Conclusion
The Mechanical Briquette Press BriqTech model: BT-070-800Max represents a practical solution for utilizing biomass into ecological fuel, with optimized efficiency and costs.
