Overview
The Hammer Mill Wood Chip AMC-650 is designed for the production of biomass pellets, offering efficiency and reliability in operation.
Hammer Mill for wood chips or shavings
Model: AMC-650
Volume chip hopper - 2.8 m³
Chip feeding screw - 4.5 meters - 2.2-3 kW
Fan 7.5 kW + Ductwork and cyclone
Hardox steel hammers - 72 pieces
Sieve surface area 1.24 m² - various sizes of holes
Main motor 55 kW or optional 75 kW
Installed power 65 kW or 85 kW
Sawdust productivity up to: 900-1500 kg/h* (1500-2500 kg/h-75 kW)
Input raw material dimensions: wood shavings, chips, sawdust, width up to 15 mm, length up to 20 mm
Output dimensions from the hammer mill: sawdust 3-10 mm depending on the sieve
Hopper dimensions 2500 mm X 1600 mm X 2595 mm
Hammer mill dimensions 2285 mm X 1420 mm X 2595 mm
Weight 2500/3000 kg
Electric control panel and command with EATON electrical and automation components
* Productivity depends on the size of the raw material, wood species, moisture, and sieve hole dimensions.
The sawdust obtained after grinding will pass through a dryer*(rotary or aerodynamic) to bring it to a moisture level of 12-14% if necessary, or it may be used directly at the sawdust briquetting factory or at the sawdust pellet production line.
Optional accessories for the Hammer Mill Wood Chip AMC-650
Vibrating sleeve filter
Conclusion
The Hammer Mill Wood Chip AMC-650 represents a practical solution for converting biomass into ecological fuel, with optimized performance and costs.
