Overview
Bale Shredding Complex CGS-0.5 is designed for biomass pellet production, offering efficiency and reliability in operation.
Bale Shredding Complex CGS-0.5 + Hammer Mill model: H-119/3SN
Technical specifications:
Productivity up to 300-400-600 kg/hour depending on the raw material
Rectangular straw bales, maximum diameter 500mm
Bale density up to 80 kg/m.cub
Raw material moisture max 25%
Number of knives in the straw shredder: 249 pcs
Number of knives in the hammer mill: 14/26 pcs
Number of hammers in the mill: 60 pcs
Output size of shredded raw material 3 mm - 10 mm, depending on the sieve
Main shredder motor: 5.5 kW
Conveyor motor, feeding belt motor: 2-3 kW
Main motor of the hammer mill: 11 kW or 18 kW
Three-phase current - 400V, coil voltage 24V/230V within limits of +/- 5%, frequency 50 Hz
Total installed power - 20 kW or 27 kW
Type of raw material: wheat straw, alfalfa, rapeseed, soy, etc.
Technology used since 2022
Length 4500mm Width 1550mm Height 1350mm
Weight 1500kg
Bale Shredding Complex CGS-0.5 consists of:
- Straw bale shredder CGS-0.5
- Hammer mill model: H-119/3SN
- Control and electrical panel, inverter, three-phase cable 6 meters
Optional accessories for the CGS-0.5 bale shredding complex:
Soft Starter, Frequency Converter, Automation
Bag filter
The Bale Shredding Complex model: CGS-0.5 is especially designed for use in briquette and pellet production lines from straw or other vegetative residues.
Operating principle: Shredder model CGS-0.5 Step I: Crushing small rectangular straw bales, Step II: Hammer mill (fine grinder) model: H-119/5SN reduces the raw material to 3-10 mm. The final fraction is fully prepared for further briquette and pellet manufacturing or as animal feed, bedding.
Straw Bale Shredder CGS-0.5 with Hammer Mill
Conclusion
Bale Shredding Complex CGS-0.5 represents a practical solution for utilizing biomass into eco-friendly fuel, with optimized efficiency and costs.
