Overview
Wood Chip and Straw Pellet Press Machine GFD-0.4 Farmer is designed for the production of biomass pellets, offering efficiency and reliability in operation.
Wood chip or straw-pellet press, Series "PellTech" model: GFD-0.4 with a flat rotating die.
Technical Features:
Productivity up to: 300-400 kg/hour depending on the raw material and die hole diameter.
Working diameter of the flat rotating die: 350 mm
Die thickness: 45/50 mm
Die rotations: +/-125 rotations/min
Pellet pressing roller diameter: 175 mm
Large transmission pulley diameter: 800 mm with 8 trapezoidal belts
Pellet diameter: 6 mm wood chips or 8 mm straw
Adjustable pellet length: 10 - 30 mm
Main motor - 1 X 30 kW
Total installed power - 30 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5%, frequency 50 Hz
Dimensions: 1400 X 1000 X 1200
Weight: 1000 kg
Moisture content of the raw material: 12-14-16% - moisture affects quality and productivity of pellets.
Raw material size: 1 - 3 mm wood chips and 3 - 6 mm straw.
Pellet density at output from the pellet machine up to 1250 kg/m3
Bulk density in Big-Bags up to 700 kg/m3
Type of raw material: wood chips*(granulation 1-3mm), cereal straw, rapeseed, alfalfa, sunflower husks, manure, and other compostable agricultural waste.
Each raw material has different conicities and die hole sizes on the flat rotating die.
Technology used since 2025.
Pellet production press - The pelletizing system consists of:
- Fully equipped and checked pellet press
- Flat die made of steel 20MnCr5G + 4 rollers made of steel 100Cr6
- Electric control panel with frequency converter for the main electric motor
- Flat die extraction device
- YATO 4kg greasing pump, without Total Ceran XM460 grease
- User manual
- Warranty certificate
Optional Accessories for the Pellet Press at Additional Cost:
Hopper (Silo) for raw material homogenization for the pellet press volume 0.4 m³
Die, Rollers, Shafts
Water dosing pump
Conclusion
Wood Chip and Straw Pellet Press Machine GFD-0.4 Farmer represents a practical solution for converting biomass into eco-friendly fuel, with optimized efficiency and costs.
