Pellet Press for Sawdust or Rapeseed-Straw, Series "PellTech" Model: GFD-0.4 Rotary Flat Dies
Technical Specifications:
Productivity: up to 300-400 kg/hour depending on the raw material and die hole diameter.
Rotary flat die working diameter: 350 mm
Die thickness: 45/50 mm
Die rotations: +/-125 rotations/minute
Pressing roller diameter: 175 mm
Large transmission pulley diameter: 800 mm with 8 V-belts
Pellet diameter: 6 mm for sawdust or 8 mm for straw
Adjustable pellet length: 10-30 mm
Main motor - 1 X 30 kW
Total installed power - 30 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5% limits, frequency 50 Hz
Dimensions: 1400 X 1000 X 1200
Weight: 1000 kg
Raw material moisture content: 12-14-16% - moisture content affects pellet quality and productivity
Raw material size: 1-3 mm for sawdust and 3-6 mm for straw
Pellet density at machine output: up to 1250 kg/m3
Bulk density in Big-Bags: up to 700 kg/m3
Raw material types: wood sawdust*(particle size 1-3 mm), cereal straw, rapeseed, alfalfa, sunflower husks.
Each raw material has different taper angles and hole sizes on the rotary flat die
Technology used since 2023
Pellet production press includes:
-Fully equipped and tested pellet press
-Flat die made of 20MnCr5G steel + 4 rollers made of 100Cr6 steel
-Electric control panel with frequency converter for the main electric motor
-Rotary flat die extraction device
-4kg YATO grease pump, without Total Ceran XM460 grease
-User manual
-Warranty certificate
Optional accessories at an additional cost for the pellet press:
Raw material homogenization bunker (silo) for pellet press with a volume of 0.4 m3
Die, Roller shells, Shafts
Water dosing pump
