Overview
Mechanical Briquetting Press BriqTech model: BT-070-800 is designed for the production of biomass pellets, offering efficiency and reliability in operation.
The mechanical press creates briquettes from wood chips of 70-75 mm, Series "BriqTech" model: BT-070-800. The mechanical press operates on a piston system - the raw material is compressed without adhesives or binders, forming briquettes (solid fuel) with a density of up to 1450 kg/m3. The briquettes are used in thermal power plants, furnaces, wood stoves, and ovens, delivering higher efficiency and energy than firewood and are 100% eco-friendly!
Technical specifications of the briquetting press:
Productivity up to: 500 – 700 kg/hour depending on the raw material
Briquette diameter: 70-75 mm
Briquette length: 100 - 300 mm
Main motor of the briquetting press - 45 kW
Feeding motor – 3 kW
Dosage motor - 3 kW
Total installed power - 51 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5%, frequency 50 Hz
Length: 3300 mm Width: 1050 mm Height: 2200 mm
Weight of the briquetting machine: 3500 kg
Moisture content of the raw material: 12-14-16 %
Raw material size: 3 - 8 mm
The density of briquettes at the exit from the mechanical briquetting press is up to 1100 - 1450 kg/m3
Type of raw material: wood waste: wood chips, shavings, MDF and particle board dust, wood sawdust; Plant waste: cereal straw, alfalfa, rapeseed, soy, sunflower husks, maize stalks, walnut shell sawdust and other biomass waste containing lignin; Other wastes: peat, RDF
The technology used from 2025
The wood chip briquette press consists of:
Mechanical briquetting press from wood chips BT-070-800
Oil cooling system via radiator and fan and oil heating
Cooling system for the briquette forming head to maintain constant temperature
Hydraulic tightening at the briquette forming head
Cooling line for briquettes of 10 meters
Bunker for homogenizing dried raw material of 3 cubic meters
Screw for transporting raw material from the bunker to the mechanical briquetting press
Electric control panel and command, inverter, with 10 meters three-phase cable
Optional accessories for briquetting press BriqTech - briquette machine:
Automation: Heating -> Automatic startup mode -> Automatic operation mode
Dust extractor (raw material), under the briquette forming head
Consumable set (bushing, piston, conical bushing) model 2025 - special steel, each raw material has a different set
Overload level sensor for homogenization bunker
Automated briquette cutter by length
Semi-automated briquette wrapping in shrink film through a tunnel
Reactive power compensation panel with capacitor banks in 6 steps, high energy efficiency, cos φ 0.99
Conclusion
Mechanical Briquetting Press BriqTech model: BT-070-800 represents a practical solution for utilizing biomass into eco-friendly fuel, with optimized efficiency and costs.
