Mechanical briquette press for wood chips and rapeseed straw, BriqTech Series, model: BT-070-800Max
The principle of the press is based on a mechanical system with piston drive, where the raw material is compressed without adhesives or binders, forming solid briquettes with a density of up to 1450 kg/m3.
Technical specifications of the briquetting press:
Production capacity: up to 600-800 kg/hour depending on the raw material
Briquette diameter: 70-75 mm for wood chips and vegetable residues, 80-85 mm for straw
Briquette length: 100-300 mm
Main motor power: 45 kW
Feeding motor power: 3 kW
Dosing motor power: 3 kW
Total installed power: 55 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5%, frequency 50 Hz
Length: 3300 mm, Width: 1550 mm, Height: 3200 mm
Weight of the briquetting machine: 4200 kg
Moisture content of the raw material: 12-14-16%
Raw material size: 3-8 mm
Briquette density at the output of the mechanical briquette press: up to 1100-1450 kg/m3
Types of raw materials: wood chips, cereal straw, alfalfa, rapeseed, soybean, sunflower husks, corn stalks, walnut shells, and other biomass residues containing lignin.
Technology used since 2023
The mechanical briquette press includes:
Mechanical briquetting press for straw or wood chips BT-070-800Max
Oil cooling system with radiator, fan, and oil heating
Cooling system for the briquette forming head to maintain a constant temperature
Hydraulic tightening of the briquette forming head
10-meter cooling line for briquettes
3 m3 homogenization bunker for dried raw material
Auger for transporting the raw material from the bunker to the mechanical briquetting press (optional, at an additional cost)
Electric control panel and command, inverter, with a 10-meter three-phase cable
Optional accessories for the BriqTech briquetting press - briquette machine:
Automation: Heating -> Automatic start mode -> Automatic operating mode
Dust extractor (for raw material) under the briquette forming head
Consumable set (bushing, piston, conical bushing) model 2023 - special steel, each raw material requires a different set
Additional set for briquetting 80 mm straw briquettes
Overload sensor for the homogenization bunker level
5 m3 homogenization bunker for raw material
Automated briquette length cutter
Semi-automated briquette wrapping with heat-shrink film using a tunnel