Overview
Mechanical Briquetting Press BriqTech Model: BT-060-400 is designed for the production of biomass pellets, providing efficiency and reliability in operation.
The mechanical press operates based on the accumulation and release of kinetic energy through a flywheel. This mechanism allows for the compression of material in a special chamber, transforming it into dense and uniform briquettes. Due to the large force generated in a short time, this type of press is ideal for high-volume production and ensures efficient energy consumption.
Mechanical Briquetting Press, briquettes made from rapeseed-straw or sawdust 60-65 mm Series "BriqTech" Model: BT-060-400. The principle of the press with a mechanical system driven by a piston – the raw material is pressed without adhesives or binders, forming briquettes (solid fuel) with a density of up to 1450 kg/m3. The briquettes are used in thermal power plants, fireplaces, wood stoves, where their efficiency and calorific power are greater than that of firewood, and they are 100% ecological!
Technical Features briquetting press:
Productivity up to: 300 - 400 kg/hour depending on the raw material.
Briquette diameter: 60-65 mm
Briquette length: 100-300 mm
Main motor of the briquette press - 22 kW
Feeding motor - 1X2.2 kW
Total installed power - 30 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5%, frequency 50 Hz
Length: 2960 mm Width: 910 mm Height: 1940 mm
Weight of briquetting machine: 2250 kg
Moisture content of raw material: 12-14-16-18%
Raw material size: 3 - 8 mm
Briquette density at the exit from the mechanical briquetting press up to 1100 - 1450 kg/m3
Type of raw material: wood waste: sawdust, shavings, chips, MDF and particleboard dust, wood sawdust; Vegetable waste: cereal straw, alfalfa, rapeseed, soybean, sunflower husks, corn stalks, walnut shell sawdust, and other biomass residues containing lignin; Other wastes from peat, RDF
Technology used from 2025
The briquette press consists of:
Mechanical briquetting press for straw or sawdust BT-060-400
Oil cooling system through radiator and fan
Briquette cooling line 7 meters
Hopper for homogenization of dry raw material with 3 cubic meters capacity
Conveyor for transporting raw material from the hopper to the mechanical briquetting press
Electric control and command panel, inverter, with a 6-meter three-phase cable
Optional accessories for briquetting press briqtech - briquette machine:
Dust collector (raw material), under the briquette forming head
Hydraulic clamping at the briquette forming head
Set for briquetting 12mm pellets - raw material humidity between 20-35%
Set of consumables (bushing, piston, conical bushing) model 2025 - special steel, each raw material has a different set
Overload level sensor for the homogenization hopper
Automated briquette cutter by length
Semi-automated briquette shrink wrapping in shrink film through a tunnel
Reactive energy compensation panel with capacitor banks in 6 steps, high energy efficiency, cos φ 0.99
Conclusion
Mechanical Briquetting Press BriqTech Model: BT-060-400 represents a practical solution for converting biomass into ecological fuel, with optimized efficiency and costs.
