Bale Chopper CGS-0.5 + Hammer Mill Model: H-119/3SN
Technical Specifications:
Productivity: Up to 300-400-600 kg/hour, depending on the raw material
Rectangular straw bales, maximum diameter 500mm
Bale density: Up to 80 kg/m³
Maximum raw material moisture: 25%
Number of straw chopper blades: 249 pieces
Number of blades in the hammer mill: 14/26 pieces
Number of hammers in the hammer mill: 60 pieces
Size of the chopped raw material at the output: 3 mm - 10 mm, depending on the sieve
Main chopper motor: 5.5 kW
Conveyor motor for feeding the chopper: 2-3 kW
Main hammer mill motor: 11 kW or 18 kW
Three-phase current - 400V, coil voltage 24V/230V within +/- 5% limits, frequency 50 Hz
Total installed power: 20 kW or 27 kW
Type of raw material: Wheat straw, alfalfa, rapeseed straw, soybean straw, etc.
Technology used since 2022
Length: 4500mm, Width: 1550mm, Height: 1350mm
Weight: 1500 kg
Bale Chopper CGS-0.5 Complex consists of:
- Bale Chopper CGS-0.5
- Hammer Mill Model: H-119/3SN
- Electric control panel, inverter, 6-meter three-phase cable
Optional accessories for the Bale Chopper CGS-0.5 Complex:
Soft Starter, Frequency Converter, Automation
Bag Filter
The Bale Chopper Complex, model CGS-0.5, is designed primarily for use in straw briquette and pellet production lines or other vegetable waste processing.
Operating principle: CGS-0.5 Bale Chopper - Stage I: Crushing small rectangular straw bales, Stage II: Hammer mill (fine shredder) model H-119/5SN finely grinds the raw material to 3-10 mm. The final fraction is fully prepared for further production of briquettes and pellets or as animal feed bedding.
Bale Chopper CGS-0.5 with Straw Hammer Mill
